Skip to Content
-
  1. All Products
  2. Stack
  3. SpeedyBee F405 Mini BLS 35A 20×20 Stack

SpeedyBee F405 Mini BLS 35A 20×20 Stack

https://docdrones1.odoo.com/web/image/product.template/100/image_1920?unique=1abc792
(0 review)

SKU-1051

  1. MCU STM32F405
  2. IMU(Gyro) ICM42688P
  3. USB Port type Type-C
  4. Barometer Built-in OSD Chip AT7456E chip
  5. Power Input 3-6S LiPo.
  6. The flight controller is powered through the G, V wires of the 8pin harness or G, V pads from the bottom side of the flight controller.

₹ 6,299.00 6299.0 INR ₹ 6,299.00 Tax Excluded

₹ 6,299.00 Tax Excluded

Not Available For Sale

(₹ 6,299.00 / Units)
  • Brand

This combination does not exist.

Contact Us
Brand: SpeedyBee

Terms and Conditions
Shipping: 2-3 Business Days

The SpeedyBee F405 Mini BLS 35A 20×20 Stack-in-1 Stack combines advanced technology with exceptional performance for FPV drones. Its upgraded F405 flight controller chip supports Bluetooth connectivity for wireless Betaflight tuning, while the 35A BLHeliS Mini ESC delivers powerful and reliable current output. With features like a battery capacity indicator and dual BEC setup, it offers convenience and versatility for drone enthusiasts. 

Manual 

Specification Package Includes

Specification

  • Main FMU Processor : STM32F405
  • Firmware : BLHeli_S J-H-40
  • USB Port Type : Type-C
  • Gyro : ICM42688P
  • Barometer : Built-in
  • OSD Chip : AT7456E chip
  • BLE Bluetooth : Supported. Used to connect with the SpeedyBee App for flight controller and ESC parameter configuration
  • WIFI : Not supported
  • SmartPort : Not supported
  • Wireless FC Firmware Flashing : Not Supported
  • Wireless Blackbox Dwonload & Analysis : Not Supported  
  • DJI Air Unit Connection Way : Direct soldering 
  • DJI Air Unit Compatibility : Compatible with all DJI Air Units: DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1. Please use the solder pads < 9V, G, T1, R1, G, SUBS(R2) > on the front right corner of the flight controller to make a pin-to-pin connection with the solder pads on the DJI Air Unit. UART1(T1, R1) is used for OSD and SUBS(R2) is used for DJI Air Unit’s internal SBUS receiver signal input.
  • Blackbox : 8MB Onboard Flash 
  • BetaFlight Camera Control Pad : Yes(CC pad on the front side) 
  • Current Sensor Input : Supported. For SpeedyBee BLS 35A V2 ESC, please set Scale=250 and Offset=-500. 
  • ESC Signal : M1 - M4 wires or soldering pads on bottom side. 
  • UART : 6 sets(UART1, UART2, UART3, UART4(Dedicated for Bluetooth connection)), UART5(Dedicated for ESC telemetry),UART6 
  • ESC Telemetry : UART R5(UART5) 
  • I2C : Supported. DA & CL pads on front side. Used for magnetometer, sonar, etc 
  • Traditional Betaflight LED Pad : Supported. 5V, G and LED pads on bottom of the front side. Used for WS2812 LEDs controlled by the Betaflight firmware. 
  • Buzzer : BZ+ and BZ- pad used for 5V Buzzer 
  • BOOT Button : Supported. Press and hold BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked. 
  • RSSI Input : Not Supported  
  • Supported Flight Controller Firmware : BetaFlight(Default), INAV
  • Firmware Target Name : SPEEDYBEEF405MINI
  • Voltage Range (V) : 3.3 - 9V
  • Current Rating (A) : 500mA-2A
  • Dimensions (L x W x H) mm : 30 (L) x 32 (W) x 7.8 (H)mm
  • Weight (g) : 9.6g
  • Shipping Weight : 0.104 kg
  • Shipping Dimensions : 12 × 6 × 3 cm

Package Includes

  • 1 x SpeedyBee F405 Mini BLS 35A 20×20 Stack

Best Prices

Best Prices in India.

Same Day Shipping

Mon-Fri till 2.00PM on Most orders.

Best Customer Support

Industry leading support.

Submit