Skip to Content
-
  1. All Products
  2. Stack
  3. SpeedyBee F7 V3 Flight Controller

SpeedyBee F7 V3 Flight Controller

https://docdrones1.odoo.com/web/image/product.template/101/image_1920?unique=1abc792
(0 review)

SKU-1049

  1. Product: SpeedyBee SB-STACK-F7V3-50A
  2. MCU: STM32F722
  3. IMU(Gyro): BMI270
  4. USB Port Type: Type-C
  5. Barometer: BMP280

₹ 7,399.00 7399.0 INR ₹ 7,399.00 Tax Excluded

₹ 7,399.00 Tax Excluded

Not Available For Sale

(₹ 7,399.00 / Units)
  • Brand

This combination does not exist.

Contact Us
Brand: SpeedyBee

Terms and Conditions
Shipping: 2-3 Business Days

Built with a better Bluetooth/WiFi 2-in-1 chip for 33% faster wireless data transfer. Update FC firmware with your smartphone in just 1 minute! Connect this FC via Bluetooth and fully configure any setting forget flight/Emuflight/INAV as you want.

Manual 

Specification Package Includes

Specification

  • Main FMU Processor : STM32F722
  • Firmware : SpeedyBee BL32 50A
  • USB Port Type : Type-C
  • Gyro : BMI270
  • Barometer : BMP280
  • OSD Chip : AT7456E chip
  • BLE Bluetooth : Supported.Used for Flight Controller configuration,built-in a single 2.4 GHz Wi-Fi-and-Bluetooth combo chip
  • Flash FC Firmware Wirelessly : Supported. Please enter MENU > FC Firmware Flasher 
  • Download/Analyze Blackbox : Supported.Please enter MENU > Blackbox Analyzer 
  • DJI Air Unit Connection Way : Two ways supported: 6-pin connector or direct soldering. 
  • 6-pin DJI Air Unit Plug : Supported. Completely compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1, no wire is needed to be changed.
  • Flash (for BlackBox) : 500MB
  • BetaFlight Camera Control Pad : Yes (CC pad on the front side)  
  • Power Input : 3S - 6S Lipo 
  • ESC Signal Pads : M1 - M4 on bottom side and M5-M8 on front side. 
  • UART : 5 sets(UART1, UART2, UART3, UART4(For ESC Telemetry), UART6) 
  • ESC Telemetry UART : R4(UART4) 
  • I2C : Supported. SDA & SCL pads on front side. Used for magnetometer, sonar, etc. 
  • LED Pad : Used for WS2812 LED controlled by Betaflight firmware. 
  • Buzzer : BZ+ and BZ- pad used for 5V Buzzer 
  • RSSI Input : Supported. Named as RS on the front side. 
  • SmartPort : Supported 
  • Firmware Target Name : SPEEDYBEEF7V3
  • SmartPort : supported
  • Supported Flight Controller Firmware : BetaFlight(Default), INAV
  • Voltage Range (V) : 3.3-9V
  • Current Rating (A) : 500mA-2A
  • Dimensions (L x W x H) mm : 30(L) x 32(W) x 7.8(H)mm
  • Weight (g) : 9.6g
  • Shipping Weight : 0.104 kg
  • Shipping Dimensions : 12 × 6 × 3 cm

Package Includes

  • 1 x SpeedyBee F7 V3 Flight Controller x 1
  • 1 x SpeedyBee BL32 50A 4-in-1 ESC x 1
  • 1 x DJI 6pin Cable(80mm) x 1
  • 1 x SH 1.0mm 15mm-length 8pin Cable(for FC-ESC connection) x 1
  • 5 x M3*8mm Silicone Grommets(for FC)
  • 5 x M3*8.1mm Silicone Grommets(for ESC)
  • 5 x M3*30mm Iner-hexagon Screws
  • 5 x M3 silicone O Ring
  • 5 x M3 Nylon Nut
  • 1 x 35V 1500uF Low ESR Capacitor
  • 1 x XT60 Power Cable(70mm)
  • 1 x 4pin SH1.0 to 3+2pin JST1.25 FPV Cam Cable(30mm)
  • 1 x 4pin SH1.0 to 3+2pin JST1.25 FPV Cam Cable(60mm)
  • 1 x 4pin SH1.0 to 4pin JST1.25 FPV Cam Cable(60mm)
  • 1 x 4pin SH1.0 Radio Receiver Cable(100mm)
  • 1 x 4pin SH1.0 to 4pin SH1.0 Analog VTX Cable x
  • 1 x 6pin SH1.0 GPS Module Cable without Connector on another end(100mm)
  • 1 x 6pin SH1.0 GPS Module Cable Connector of another end

Best Prices

Best Prices in India.

Same Day Shipping

Mon-Fri till 2.00PM on Most orders.

Best Customer Support

Industry leading support.

Submit